Curated Library
Cisco CCNA 200-301 v1.1: Networking, Routing, Switching, Security and Automation
A roughly 58-hour, day-by-day course aligned to the CCNA 200-301 v1.1 exam. It runs from network devices, cabling and the TCP/IP model through IPv4/IPv6 addressing, subnetting, VLANs, STP, OSPF, ACLs, NAT, wireless, and automation topics (REST APIs, JSON, SDN, Ansible, Terraform). Most lectures have a hands-on Packet Tracer lab, and the course ends with a 2.5-hour mega lab. It suits beginners aiming for the CCNA exam or an entry-level networking role.
Lessons by Jeremy's IT Lab on YouTubeCurated by YodaHut. These lessons are hosted on YouTube and produced by their original creators, who are not affiliated with YodaHut. You still earn YodaCoins, keep your streak and track progress here.
What You'll Learn
- Explain how switches, routers, firewalls and the TCP/IP and OSI layers work together to move traffic
- Subnet IPv4 networks by hand, including VLSM, and configure IPv4 and IPv6 addresses on Cisco routers and switches
- Configure and troubleshoot VLANs, trunks, inter-VLAN routing, STP/RSTP, and EtherChannel
- Configure static routing, OSPF, and EIGRP, and describe RIP and HSRP
- Implement network services and management: DHCP, DNS, NTP, SNMP, Syslog, SSH, NAT/PAT, ACLs, and QoS basics
- Apply Layer 2 security (port security, DHCP snooping, DAI) and describe wireless architectures, WLC setup, WAN/cloud concepts, REST APIs, JSON/XML/YAML, and configuration-management tools
Prerequisites
- No prior experience needed
- A Windows, macOS or Linux computer able to run Cisco Packet Tracer (free download) for the labs
Course Curriculum
- 1Network Devices: Clients, Servers, Switches, Routers and Firewalls30:26
- 2Setting Up Anki Flashcards for the Course14:56
- 3Lab: Packet Tracer Introduction15:18
- 4Network Interfaces and Cables35:52
- 5Lab: Connecting Network Devices5:33
- 6The TCP/IP Model and Layered Networking42:42
- 7Lab: The OSI Model in Network Traffic8:05
- 8Introduction to the Cisco IOS CLI31:06
- 9Lab: Basic Device Security10:26
- 10Ethernet LAN Switching (Part 1): Frames and MAC Addresses38:13
- 11Ethernet LAN Switching (Part 2): ARP and the MAC Address Table33:41
- 12Lab: Analyzing Ethernet Switching10:29
- 13IPv4 Addressing (Part 1): Binary, Classes and Netmasks40:21
- 14IPv4 Addressing (Part 2): Configuring Router Interfaces30:42
- 15Lab: Configuring IP Addresses10:06
- 16Switch Interfaces, Speed and Duplex32:28
- 17Lab: Configuring Interfaces11:54
- 18The IPv4 Header30:11
- 19Routing Fundamentals31:00
- 20Static Routing37:44
- 21Lab: Configuring Static Routes12:29
- 22Lab: Troubleshooting Static Routes9:45
- 23The Life of a Packet20:13
- 24Lab: Life of a Packet15:36
- 25Subnetting (Part 1): Class C Networks and CIDR28:54
- 26Subnetting (Part 2): Class B Networks24:47
- 27Subnetting (Part 3): Class A Networks and VLSM23:53
- 28Lab: Subnetting with VLSM14:59
- 29VLANs (Part 1): Concepts and Access Ports23:45
- 30Lab: Configuring VLANs11:02
- 31VLANs (Part 2): Trunks, 802.1Q and Router on a Stick40:01
- 32Lab: Trunks and Router on a Stick23:23
- 33VLANs (Part 3): Layer 3 Switches and SVIs32:32
- 34Lab: Inter-VLAN Routing with SVIs25:19
- 35DTP and VTP37:34
- 36Lab: DTP and VTP18:47
- 37Spanning Tree Protocol (Part 1): Loops and Root Bridge Election38:39
- 38Lab: Analyzing STP18:55
- 39Spanning Tree Protocol (Part 2): Port States and Timers42:18
- 40STP Toolkit: PortFast17:34
- 41STP Toolkit: BPDU Guard and BPDU Filter24:24
- 42STP Toolkit: Root Guard19:44
- 43STP Toolkit: Loop Guard18:49
- 44Lab: Configuring STP (PVST+)17:09
- 45Rapid Spanning Tree Protocol43:01
- 46Lab: Rapid STP19:50
- 47EtherChannel: PAgP, LACP and Static41:33
- 48Lab: Configuring EtherChannel25:03
- 49Dynamic Routing Fundamentals44:38
- 50Lab: Floating Static Routes23:20
- 51RIP and EIGRP43:42
- 52Lab: Configuring EIGRP26:14
- 53OSPF (Part 1): Areas and Basic Configuration39:40
- 54Lab: Configuring OSPF (1)22:07
- 55OSPF (Part 2): Cost and Neighbor States36:55
- 56Lab: Configuring OSPF (2)22:10
- 57OSPF (Part 3): Network Types and DR/BDR47:53
- 58Lab: Configuring OSPF (3)21:25
- 59First Hop Redundancy Protocols: HSRP, VRRP and GLBP40:25
- 60Lab: Configuring HSRP22:01
- 61TCP and UDP33:59
- 62Lab: TCP and UDP in Wireshark11:15
- 63IPv6 (Part 1): Addressing and Abbreviation39:26
- 64Lab: Configuring IPv6 Addresses18:02
- 65IPv6 (Part 2): EUI-64 and Address Types39:33
- 66Lab: IPv6 with EUI-6421:02
- 67IPv6 (Part 3): Header, NDP and Static Routing43:51
- 68Lab: IPv6 Static Routes19:17
- 69Standard ACLs46:51
- 70Lab: Standard ACLs27:01
- 71Extended ACLs40:55
- 72Lab: Extended ACLs22:08
- 73CDP and LLDP39:23
- 74Lab: CDP and LLDP24:37
- 75NTP and Device Clock Configuration42:46
- 76Lab: NTP19:08
- 77DNS30:11
- 78Lab: DNS17:31
- 79DHCP and DHCP Relay37:02
- 80Lab: DHCP17:49
- 81SNMP29:21
- 82Lab: SNMP13:37
- 83Syslog27:58
- 84Lab: Syslog14:03
- 85SSH and Telnet31:07
- 86Lab: SSH15:50
- 87FTP, TFTP and IOS File Systems30:55
- 88Lab: FTP and TFTP15:36
- 89NAT (Part 1): Private Addressing and Static NAT32:10
- 90Lab: Static NAT14:12
- 91NAT (Part 2): Dynamic NAT and PAT29:40
- 92Lab: Dynamic NAT and PAT15:01
- 93QoS (Part 1): IP Phones, Voice VLANs, PoE and Queuing32:33
- 94Lab: Voice VLANs20:18
- 95QoS (Part 2): Classification, DSCP, Shaping and Policing41:46
- 96Lab: Configuring QoS15:41
- 97Security Fundamentals: Threats and Common Attacks38:40
- 98Lab: DHCP Starvation Attack with Kali Linux10:25
- 99Port Security34:28
- 100Lab: Port Security17:03
- 101DHCP Snooping28:23
- 102Lab: DHCP Snooping15:41
- 103Dynamic ARP Inspection32:50
- 104Lab: Dynamic ARP Inspection20:53
- 105LAN Architectures: 2-Tier, 3-Tier, Spine-Leaf and SOHO28:06
- 106Lab: STP and FHRP Synchronization19:11
- 107WAN Architectures: Leased Lines, MPLS and VPNs37:34
- 108Lab: GRE Tunnels22:04
- 109Virtualization and Cloud Fundamentals38:41
- 110Containers: Docker and Kubernetes13:33
- 111VRF: Virtual Routing and Forwarding18:03
- 112Lab: Installing Linux on VirtualBox8:43
- 113Wireless Fundamentals: RF, Standards and Service Sets35:57
- 114Wireless Architectures: Autonomous, Lightweight and Cloud APs38:21
- 115Wireless Security33:53
- 116Wireless Configuration with a WLC46:38
- 117Lab: Configuring Wireless LANs17:28
- 118Intro to Network Automation and SDN Planes33:27
- 119AI and Machine Learning Concepts41:49
- 120JSON, XML and YAML28:56
- 121REST APIs31:45
- 122REST API Authentication29:15
- 123Software-Defined Networking: SD-Access and Cisco DNA Center28:19
- 124Ansible, Puppet and Chef21:33
- 125Infrastructure as Code and Terraform22:29
- 126CCNA Mega Lab: Full Network Configuration2:38:50
About the Instructor
Jeremy's IT Lab
YouTube creator
126 lessons here 58h 26m
The lessons in this course were produced by Jeremy's IT Lab and are published on YouTube. YodaHut selected and sequenced them into this course; we did not make them, and Jeremy's IT Lab is not affiliated with YodaHut.
Visit the channel on YouTubeMore in the Library: IT & Software
Kubernetes for Beginners: Architecture, Deployments, Networking and Helm
Docker for Beginners: Containers, Images, Compose and Volumes
Docker and Kubernetes for Beginners: Containers, Images and Deployments
Kubernetes for Beginners: Hands-On from Pods to Production Features
CompTIA Security+ SY0-701 Exam Prep: All Five Domains plus Practice Questions
CompTIA Security+ SY0-701 Exam Preparation Course
- 126 lessons
- 58h 26m of video
- Earns YodaCoins & streaks
- Timestamped notes
- Free — hosted on YouTube
No certificate is issued for Library courses.